Battery Center > Battery Analyzer > 6V/12V STC 4110 Battery Analyzer

6V/12V STC 4110 Battery Analyzer

6V/12V STC 4110 Battery Analyzer
Hover to zoom or click to enlarge
SKU STC 4110 Battery Analyzer
Weight 10.00 lbs
Dimensions W: 11.00", H: 5.00", L: 8.00",
Our price: $2500.00

Dual Mode Battery Analyzer STC 4110

*****Approx. 2 Wks. Out*****


  • Amp hour range of 4 to 100 A.H.
  • Copper conductor & alligator clips
  • Thermo laser gun
  • Weather Proof Case
  • 48" HIGH-FLEX instrumentation cable
  • Automatically determines voltage of battery
  • Unit measures 8"L x 5"H x 11"W
  • Weighs 10 lb.

Typical Applications

  • Emergency lighting systems 
  • Propulsion Batteries
  • Communication Batteries
  • Fire alarm systems
  • Integrated security systems
  • Communication systems
  • To verify State-of-Charge of new and
    stock batteries
  • To verify emergency system
    minimum operating times
  • To verify capability of operating
    backup systems
  • Optimized Performance via Battery
  • Propulsion systems
  • UPS uninterruptible power systems
  • Airborne applications
  • Wherever batteries are utilized
  • Allows technician to quickly
    determine condition of battery to
    produce its rated power

 Description of device and operation

For the pre-load static test, the Analyzer automatically determines the voltage of the battery. The Amphour rating is entered to set the parameters prior to the load testing. A voltmeter function may be used to check the charging circuit.

For the dynamic load test, a microprocessor controlled load test sequence is operator initiated with the battery disconnected from the charging circuit. The load current is based on the entered AmpHour capacity. The battery condition is evaluated during the load test and is displayed on LED’s as: Good, marginal, bad

The 4110 will perform an additional test that determines the remaining capacity of the battery. This result can be compared to the minimum standby requirement to determine if the battery will meet the demands of an extended power failure. A math calculation routine is available in the 4110 to size batteries for various fire, UPS, and security systems.


Input Voltage: 5-15VDC
Testing Range: 4-110AH (12V), 4-40AH (6V)
Load Current: 130mA (static test), up to 30 amps (dynamic test)
Dynamic Load Interval: 60 seconds
Input Connection: Military Spec-97 Series Connector Set
Operating Tempatures: 32 F-140 F
Dimensions: Length 8", Height 5", Width 11"
Weight: 10 lbs

: *
: *
: *
Type the characters you see in the picture:


Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.
This website stores data such as cookies to enable important site functionality including analytics, targeting, and personalization. Find out more